OK the 8w R100 lost its final drive transistor. I happen to come up
on a 25w Radius mobile. The boards will not make a direct swap
because the Mobile's length is slightly longer. So I am taking the
Mobile's heatsink to work so I can machine it and lap it so it will
mate with the big heatsink in the R100. In the R100 coming off the PA
deck power filter board there is a 4 wire harness labled CMOS going
to the PA board. Now in the Radius mobile there is five wires. can
someone tell me what these are and the pinout because the colors are
reversed on mobile also.
Thanks,
Jason Mathis
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
