OK, I do not know if this will help. I have the R100 manual and I have a UHF Maxtrac manual. I know the Maxtrac is not a Radius, but I believe the PA's are the same. I'm sure someone will pipe up and correct me if I'm wrong.
R100 wire color and functions: Blue - Thermal shutback Green - Detector Yellow - 9.6T Orange - Control voltage Maxtrac UHF 25 watt PA wire color and functions: Blue - Current sense Lo Red - Unswitched B+ Green - Current sense Hi Orange - Controlled B+ Yellow - 9.6T I do have a manual for an 25 watt UHF M120 (Radius), but it shows 6 wires. (go figure!) M120 wire color and functions: White - Temp sense Blue - Current sense lo Red - Unswitched B+ Green - Current sense Hi Orange - Controlled B+ Yellow - 9.6T Good luck! Gary --- In [email protected], "jason mathis" <[EMAIL PROTECTED]> wrote: > > > OK the 8w R100 lost its final drive transistor. I happen to come up > on a 25w Radius mobile. The boards will not make a direct swap > because the Mobile's length is slightly longer. So I am taking the > Mobile's heatsink to work so I can machine it and lap it so it will > mate with the big heatsink in the R100. In the R100 coming off the PA > deck power filter board there is a 4 wire harness labled CMOS going > to the PA board. Now in the Radius mobile there is five wires. can > someone tell me what these are and the pinout because the colors are > reversed on mobile also. > > Thanks, > > Jason Mathis Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
