Re: [Repeater-Builder] Help needed

29 Oct 2004 20:43:56 -0000

No, the rods are full length, in fact they will bottom out.  With the caps or inductors removed they simply will not tune down to the ham frequency.  With the caps in place, we can get to the upper ham band.  No soap for the others.  It is uncertain where they came from, have been stored in one of our member's storage facility for years.  We haven't put a price on these at this time.

73
Gene
******
Q wrote:
How much for the duplexer? Have the tuning rods been cut short?
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Friday, October 29, 2004 10:00 AM
Subject: Re: [Repeater-Builder] Help needed


  
I have a Sinclair Q202G 4-cavity Pass/Reject VHF Duplexer which is
currently ttuned up on a 600 KHz split (on 166.350/166.950 MHz). It came
came with a Motorola MSR-2000 Repeater on the same frequency - I just
picked these up from the BLM with a bunch of other gear and they're
    
surplus
  
to my needs. Contact me off the list if you're interested.
Larry
[EMAIL PROTECTED]


Original Message:
-----------------
From: Q [EMAIL PROTECTED]
Date: Fri, 29 Oct 2004 01:17:56 -0400
To: [email protected]
Subject: Re: [Repeater-Builder] Help needed




Also,the words"2meter duplexer" and "cheap" do not go together at all. No
such thing as a cheap 2 meter duplexer that works well.Prepare to pay if
    
you
  
want one.
----- Original Message -----
From: Cecil Ferguson <[EMAIL PROTECTED]>
To: Repeater-Builders Group <[email protected]>
Sent: Thursday, October 28, 2004 11:16 PM
Subject: [Repeater-Builder] Help needed


    
I am a new member of the group with a question.  We have the opportunity
to replace our present "pieced together" repeater with a Micron, which
is offered at a better than believable price.  We will need crystals,
however.  Can anyone give us the approzimate cost of a set of crystal
units for this endeavor.  Sorry, I can't provide more info at this time,
as I haven't seen the units, which are operational at this time. Too,
any good leads on a set of duplexers for 2 meters?  Must be operationad
and cheap!

Any and all assistance will be greatly appreciated.

Gene Ferguson, W4FWG
Fairfield, KY






Yahoo! Groups Links







      








Yahoo! Groups Links








--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .







Yahoo! Groups Links








    









 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/








Yahoo! Groups Links

Reply via email to