Reminds me of the time I took a pair of highband Motorola Motran radios ... wired them back to back for use as a portable repeater, took them, a couple of antennas, antenna mounts, 12 volt batteries and the always necessary clip leads to Mexico (Baja California)for one of the Baja 500 off road races.
That was 30+? years ago. The radios are long gone ... but I still have the portable interface kits I built up to match the interconnecting audio and PTT keying path - over a pair of wires. It was all solid state, no relays used and each end of the system could be swapped for the other end if something quit. Might even consider placing those items in the most likely ever growing Kevin Custer Repeater-Builder Museum of fun projects. ;) Neil Laryn Lohman wrote: > > Yes......Yes---the mark of a SOLID repeater engineer---that would > be he who could take the list of "equipment" below and put it > together into a flawless system. Perhaps we should add an > amateur-grade mobile radio or two for tx and rx? <grins> > > All in fun... > > Laryn K8TVZ > > --- In [email protected], Kevin Custer <[EMAIL PROTECTED]> > wrote: > > Neil McKie wrote: > > > > > Would that be a Motorola Micor ?? > > > > > > > Actually, I think he meant GE Micron, it's similar in size and features > > to the Motorola Master 11 which was popular in the near future to build > > repeaters from. These radios are not to be confused with the less > > popular Motorola Mitrex, Syntor XX, and GE Pionex. Any of these > can be > > connected to "a set of duplexers" (plural) using Radio Shack RG-58 and > > of course to your favorite Cushcraft Ringo antenna, via 9913. > > > > (it almost hurt to type this) <grin> > > > > Enjoy! > > Kevin K. Custer W3KKC > > List and site owner, Repeater-Builder > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
