Why guess? With proper test equipment you can plot the response and see
what its really doing. A "good" repeater will faithfully reproduce what
it actually hears without changing the response. There is a good
discussion in archive and on the repeater-builder site about
pre-emphasis,its a must read for repeater owners! After you insure the
repeater is performing well,then you can tell those that sound tinny
that its their equipment which is at fault. There should be little
difference when you listen to a repeated signal,then switch to listen to
them direct on the input and compare the audio.
Mathew Quaife wrote:
>most of them are using yeasu radios with stock mics that came with the
>radios. Just want to make the audio a little more to the base side rather
>than the tinny sound I get, but thought I would just play with it to see if
>it could be changed a little. But I do agree with what you are telling me.
>
>Mathew
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
