There is still plenty of tuning rod left, I would say it should go, but hard
to tell much more about it than that.  I looked on the website, but pics of
them to go by.  These can's are about 6.5" in Diameter and about a foot
high, with two tuning knobs on the top of them.

Mathew


>
> At 12/28/2004 06:00 PM, you wrote:
>
>
> >Anyone have any idea how to identify a set of TX-RX duplexers for
> >the 450 band if there is no tags on it.  The setting of the freq
> >that was written on them is 456.150. Any help would help.
> >
> >Thanks.
> >
> >Mathew
>
> If that freq. was stamped by the factory, it should tune down to 440 MHz
> with no mods or cable changes.
>
> Bob NO6B
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Reply via email to