If you use a Yaesu HT then fine. But, not many commercial HT's have 16 button pads, especially at 900 MHz.
73, Dick, W1KSZ -----Original Message----- From: Q [mailto:[EMAIL PROTECTED] Sent: Wednesday, December 29, 2004 8:34 PM To: [email protected] Subject: Re: [Repeater-Builder] Re: Repeater Controllers Mine uses all 16 digits,and I told it to do so....who still messes with 12 digit pads??? This is the 21st century after all.... Mark Holman wrote: >I know a Repeater that uses the ABCD commands in theirs and one is speed >dial to A A A auto service ? I think they still do ! >Mark Holman AB8RU >*** IT Student ***** >Happy Holidays >----- Original Message ----- >From: "Jim B." <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Monday, December 27, 2004 2:24 PM >Subject: Re: [Repeater-Builder] Re: Repeater Controllers > > > > >>Richard W. Solomon wrote: >> >> >>>I looked for one of those programs that works on a 486 Laptop, >>>but couldn't find one that works with what they jokingly refer >>>to as a sound card at Compaq back then. >>>But the Zetron only needs a 12 button pad. >>>Guess I'll wait for the new version from NHRC. >>> >>>73, Dick, W1KSZ >>> >>> >>What's the big deal about 12 vs. 16 button pads? I don't know of any ham >>controllers that REQUIRE using the fourth column! >>-- >>Jim Barbour >>WD8CHL >> >> >> > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
