At 1/17/2005 01:07 PM, you wrote:
>I was getting ready to split a Clegg FM-76.
Basically identical to a Midland 13-509. Our club has 2 on the air now &
have performed well for over 25 years. Recently we did have one problem
with one of the RXs: a cold solder joint on the 2nd LO (10.245 MHz)
xtal. That's it.
The 509's squelch leaves a bit to be desired. You can add a Micor squelch,
or I have a mod to the existing squelch circuit (change 1 cap, add 1
resistor) that greatly shortens the tail (makes it sound like a G.E.
MVP). Let me know if you need the latter.
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
