I recently picked up a Micor Compa-Station exciter/PA. I know its
for 132-174 MHz. and I believe it to be a 100 watt PA deck, but I
can't seem to find what the duty cycle is. The PA board part number
is TLD5953A1093R. It has the 14 1/2" long Micor fins across the top
of the module. The module, with the fins, is 6" high.
I know this isn't the 100% duty cycle configuration, but can it be
run at 100% if it has constant forced air cooling across the fins?
Also, the board appears to be the same for the 100 watt 100%
configuration. Is it possible to simply replant this board in the
larger chassis/heat sink? Assuming for a moment that I could find a
dead one.
Any help and/or advice will be greatly appreciated.
Scott Madison, WN1B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
