Hey Will, You will not want to use 9913 for a repeater. You will want to use Hard-Line type of coax. There are many post in the repeater-builders files on why not to use LMR-400 and Belden 9913 types of coax. You may want to go and review them just a bit. There are also some good loss charts on some of the coax manufactures web sites. Like Andrews, Com-Scope and RFS. Good luck and 73, Russ, W3CH
----- Original Message ----- From: "n2odw" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Sunday, February 20, 2005 8:24 PM Subject: [Repeater-Builder] Line loss > > > > Hello to the group, > > I'm new to this group and also new at trying to build a repeater > system. My main question is about line lost. Could anybody tell me how > to figue out line loss out for the purpose my repeater application and > for the use of the antenna cable I have? The cable is Bendel 9913 @ > 50ohm, planning to use 100ft. Thanks > > W4WWM / Will > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
