Hello Rod:

I am looking at the 221 Series Tone remote control panel pc board manual 
and it
matches what you describe, K1 left front, LED on the left rear DS1.
this is the 2175 decoder card.  BTW this 221 series was available in
three models.

You need the Model 510N tone remote control console (like a teleset with 
  intercom, mon, f1 and f2 buttons on it depending what model remote you 
have connected.  I presume you have this unit.

If you wish, I can xerox a copy of the Model 221 Series tone remote 
control panels, and send it to you. It is the 098-0218 Instruction 
manual.  Please email me your address direct.

Ciao, Tony

[EMAIL PROTECTED] wrote:
 > Hello Tony, Rod here. I do not have a camera that can do that, but I
 > will try to discribe it. Looking on the top, with the contacts that you
 > slide it in to the connector facing you, I see a yellow plastic box (K1)
 > which appears to be a relay on the left front and a red LED on the
 > left rear (DS1). On the right rear corner there is a resister (CR10). I
 > hope this helps.
 >
 > Rod
 >
 >







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to