Re: [Repeater-Builder] 440 4 Pole Antenna

[Chuck Kelsey]

Yes, you are correct.   But now I have doubts that we actually "built" those antennas ;-)   I had to buy the aluminum rod for the elements and the coax to make the harness instead of manufacturing it from scratch ;-)   Sorry, couldn't resist.   Chuck WB2EDV       ----- Original Message ----- From: Richard D. Reese To: Repeater-Builder@yahoogroups.com Sent: Saturday, March 26, 2005 12:17 AM Subject: [Repeater-Builder] 440 4 Pole Antenna I hope Chuck Kelsey sees this - - -    About 15 or twenty years ago there was an article published in either Ham Radio or perhaps 73 magazine on the construction of a 440 4 pole antenna.  It was written by Chuck WB2EDV if my memory is correct.   I built one for a friend and he has removed it from his tower for maintenance.  He is now ready to place it back on the tower legs and asked me what the spacing is between elements.  Well I cannot fond the paper work.  I think it was 23 inches on center.  Chuck, is that correct?   Thanks in advance.   Rich  WA8DBW       Richard D. Reese http://www.wa8dbw.ifip.com   Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.