Ok, I'm sure these duplexers are tuned correctly, but here is what is 
happening.  If I inject 1.5 watts into the transmit side of this 
duplexer I get about 95% of that back, with about 1.4 watts from the 
duplexer.  Then I pump 130 watts into the duplexer and only get 60 
watts back.  Why such the loss with the higher power?  Transmitter and 
amp are both ok on a dummy load, looks good on the spectrum analyzer, 
no problem there.  The amp is rated 2 watts in for 200 watts out.  I 
put in 1.5 watts, to get the 130 watts out, that is fine.  Other part 
that I am confused with, the amp into a dummy load, starts out at 100 
watts and then gradually creeps upto 130 watts over about 30 seconds.  
Current draw on the power supply is 18 amps, from a 70 amp astron.  
Could it be that the power supply is slowing giving juice to the amp, 
kinda like the caps might be weak?  Any thoughts?

Mathew








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to