Yup, Real LDF series with soft foam and everything.
On Apr 8, 2005 12:05 PM, Jim B. <[EMAIL PROTECTED]> wrote:
>
> Are you sure it was LDF1 and not FSJ1? LDF1 is VERY rare (I've never
> seen it), but FSJ1 is pretty common. LDFx is regular hardline, FSJx is
> Superflex.
> --
> Jim Barbour
> WD8CHL
>
>
> mch wrote:
>
> > Sounds like it must have been larger than 1/4".
> >
> > Joe M.
> >
> > DCFluX wrote:
> >
> >>I've am using the LDF1-50 on my 64 machine. I dont know what the deal
> >>is but the reducers I was going to run both for both RG-59 and RG-8X
> >>wouldn't fit this stuff. So I had to just solder the connector
> >>straight to the cable The center conductor of the cable just fits
> >>inside the PL-259's. I don't know if RF parts sent me 3/8" by mistake
> >>or what. But it works about the same as the RG-213 that it replaced.
>
> Yahoo! Groups Links
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
