Eric, tnx for the reply. What year is your catalog, and is Wacom still in business? I am looking for more specific info (insertion loss, reject loss, etc) about tuning and setting the offset. It does not seem to have any way to set the offset without opening up the cans. 73's, George WA2VNV
--- In [email protected], Eric Lemmon <[EMAIL PROTECTED]> wrote: > George, > > My WACOM catalog lists the WP-698 as a BpBr duplexer for the 1.270- 1.295 > GHz band., with a 12 MHz minimum spacing. There is no further info. > Since it is a BpBr device, I should think that the main tuning rod sets > the pass, while the trimmer sets the notch. > > 73, Eric Lemmon WB6FLY > > wa2vnv wrote: > > > Hi all - I'm looking for specs and tuning information on a Wacom > > WP-698 > > duplexer. It's a 4 can unit, 2 for Tx, 2 for Rx. Single screw for > > tuning. What sets the spacing for Pass & Reject. 20 or 12 MHz > > spacing? > > Tried the usual searches but don't find any specifics for this model. > > Anyone out there got some info? Thanks. > > George Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
