Hmmm, 11.2 * 2 * 10?
or 11.2 * 20? (*40 for UHF) What about changing the IF crystals to 10.7? Then you should be ok until you hit 214 or 428 MHz? On 4/28/05, Scott Zimmerman <[EMAIL PROTECTED]> wrote: > In looking at the actual research here at the shop. (I was at home last > night) The actual breakpoint is at 224T100 / 222R500. Any frequency below > this is bad. > > This good/bad determination is based on a transmit harmonic less than 15Khz > either side of a receiver sensitive spot. It's an odd thing to describe, but > I will try to do so in an article soon. > > There *may* also be a similar problem crop up with the 220 micor in the > upper frequencies. I am building one of those now. I will do testing on it > once it is built and report my findings. > > Scott > > Scott Zimmerman > Amateur Radio Call N3XCC > 612 Barnett Rd > Boswell, PA 15531 > > ----- Original Message ----- > From: "mch" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, April 27, 2005 11:11 PM > Subject: Re: [Repeater-Builder] Lookling to build a 220MHz repeater > > > So 224.300 is 'iffy'? Actually it would be the frequencies 1.6 MHz below > > that, right? (the inputs - 222.100 - 222.700) > > > > Joe M. > > > > Scott Zimmerman wrote: > > > > > > Helps if I would include the actual frequencies instead of just xxx for > > > place markers!!! > > > > > > Bottom of the repeater band through about 224.300-. The phenomenon is > > > centered on 224.000- > > > > > > Scott > > > ----- Original Message ----- > > > From: "Duane Brantley" <[EMAIL PROTECTED]> > > > To: <[email protected]> > > > Sent: Wednesday, April 27, 2005 1:17 PM > > > Subject: [Repeater-Builder] Lookling to build a 220MHz repeater > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > -- > > Internal Virus Database is out-of-date. > > Checked by AVG Anti-Virus. > > Version: 7.0.308 / Virus Database: 266.10.2 - Release Date: 4/21/2005 > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
