At 12:35 PM 6/25/2005, Ken Arck wrote:
>Dave
>
>"Splatter" infers a signal wide enough to "spill over" to an
>adjacent channel. Indeed, your description of them hearing your xmtr
>30 KHz away confirms that.
>It is not an issue of duplexer tuning nor is it likely one of xmtr tuning.
I only mentioned it in the context of "what have you changed".
>It is a matter of either over-deviating for one reason or another.
>How are you modulating the repeater's xmtr?
We set the TX to 3kHz deviation on a friend's service monitor.
First we set up the RX, into the RC-210, to get the proper levels at
5kHz max deviation, then we set up the transmitter to have 3kHz
deviation when the RX is seeing a 3kHz dev input, and we set the ID
to 3kHz. (makes it easy to remember..)
I'm pretty confident that nothing has been changed since then, you'd
have to go through a lot of hoops to get into the adjustments.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
