Oops on me, 140 into the duplexer with 70 watts out and a 2.2 dB insertion loss on the cans per TXRX. 3 Cans per side. I figured it up at 140 watts in which should give me about 88.6 watts back out of the duplexer.
Mathew
Dave VanHorn <[EMAIL PROTECTED]> wrote:
At 09:42 AM 7/8/2005, Mathew Quaife wrote:
>Ok, this brought up a good point. Just for sakes I took the watt
>meter, from the amp into a 50 ohm load, I get 140 watts out, into
>the duplexer's I get 70 watts out, something there has
>changed. With a 2.2 dB insertion loss, I should be getting right
>about 90 watts out if I did the math right? Anyone get anything
>different, if so, give me the math figures so I can check it again.
>
Is the spec on those cans that high? I would have thought closer to
1dB. Still, you're loosing 3dB.
Someone kicked the can lately??
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Mail for Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
