Well Kevin seems the one receiver had the diode removed and I
(ASSUMED) that the other one was removed. I do have the ICS controller
connected but added a npn transistor between the squelch shunt and the
controller as a follower. I have a voltage swing of 1 to 10 volts with
the squelch. I notice that the controller does not respond every time
when the squelch breaks and am still looking as to the reason. just
stops seeing the voltage swing. I check with a meter and it is
swinging fine. COS Pot doesn't seem to make much difference where I
set it. Well let me double check later this evening as I stared at the
project so long I was overlooking an obvious diode. Glad you mentioned
it sounded like it needed to be converted so I double checked the
receiver diode first thing! Thanks Steve
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
