Good Day If you are able to lose = - 6 db of the signal to each receiver you could use a passive device which you can build yourself and save many many dollars.
There is pleny of information on the web on a 4-port "Wilkonson divider ". The same phasing harness is used for a 4-stack dipole array so you could ask around for one or buy it off the shelf-these are frequenct contious. Regards Bradley Glen ZS5WT http://members.harc.org.za/zs5wt --- Mathew Quaife <[EMAIL PROTECTED]> wrote: > How about a lead to such vendors and some model > numbers as well, would be helpful. > > Mathew > > > Eric Lemmon <[EMAIL PROTECTED]> wrote: > Vincent, > > It's easy! What you need is known as a > multicoupler. This unit usually comprises a > preselector to limit the bandwidth of the incoming > signals, a low-noise amplifier, and a splitter with > two, four, or eight output ports. The gain of the > amplifier is tailored to the number of splits so > that the loss in the splitter is overcome. > > 73, Eric Lemmon WB6FLY > > > --------------------------------- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf > Of Vincent Caruso > Sent: Sunday, December 18, 2005 1:04 PM > To: [email protected] > Subject: [Repeater-Builder] Multiple receivers one > antenna ??? > > > > I would like to install one antenna for four link > receivers. How > complicated is this? What do I need to do this? > > Thanks in advance > > > > > > > > > > --------------------------------- > YAHOO! GROUPS LINKS > > > Visit your group "Repeater-Builder" on the web. > > To unsubscribe from this group, send an email > to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to the > Yahoo! Terms of Service. > > > --------------------------------- > > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam > protection around > http://mail.yahoo.com __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
