You could keep the cor active and provide constant
audio to the voter, knowing the voter will always
be working. You could even mix the constant audio
sources with cor/audio provided inputs.
You would have to figure a means to obtain a desired
cos/cor function you might use for your repeater
controller (or equiv) tx ptt/cor in-function.
The nice thing about the ldg voter is the easy front
panel setup and the display.
cheers,
skipp
> Erik Finskas <[EMAIL PROTECTED]> wrote:
>
> Hello group.
>
> I'm looking at a LDG RVS-8 voter, and I'm curious about the COR inputs.
> In the current linking system there is no COR signal provided, just
> unsquelched audio. Does the RVS require the COR signal to be connected,
> or would it work so that all COR inputs are tied high, so it would look
> like there are 8 receivers on all the time, between which the voter
selects?
>
> The output of the voter would be fed to the repeater, which has a
> squelch circuitry to detect COR state and a PL decoder.
>
> ..
> Erik OH2LAK
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
