Yea, that would work except trying to get approval to do that from both site owners would be nearly impossible. That's why I'm trying to go RF.
MIke --- In [email protected], [EMAIL PROTECTED] wrote: > > > How about interconnect via wire? > > Neil - WA6KLA > > ---- Original Message ---- > From: [EMAIL PROTECTED] > To: [email protected] > Subject: RE: [Repeater-Builder] Linking Suggestions Please > Date: Mon, 20 Mar 2006 00:45:07 -0000 > > >Hi, > >Here's the deal. I have two sites...Site one is where my 440 hub > >repeater is located. Site two is where I'm planning to put a 220 > >repeater. The distance between the two is about 20-30 yds. > >I need to find a way to link the two together. Doing it on 440 is out > > > >for several reasons. I could use 900 with a couple of GTX900s or > >similiar but that seems to be a total waste not to mention would cost > > > >$250-$300. Seems like there should be an alternative to spending that > > > >kind of money. I also need this to work without attracting a lot of > >attention, ie...putting up antennas outside. The radios would need to > > > >be able to do CTCSS or DCS. > > > >Someone suggested using telemetry radios. Anyone have any experience > >with those? Someone else said I might be able to do it with hts on > >low > >power. I have been thinking about 1.2 GHz but can't locate anything > >that would work. > > > >Your suggestions? > > > >Thanks > >Mike K4IJ > > > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
