Hi All,
I am wanting to use one TX from our repeater site, to link to two link
RX's, these are on opposite sides of the repeater.
I was thinking about having two different CTCSS tones, one for each, and
then having the TX generate the two tones together. This way I can use one
freq., but still have some form of control over the links by switching either,
or both CTCSS tones off/on as required.
Any ideas, or comments on this setup would be helpful
Regards
Kev.
YAHOO! GROUPS LINKS
|
- [Repeater-Builder] Two CT... Kevin & Natalia Mitchell
- Re: [Repeater-Builde... Bob M.
- Re: [Repeater-Bu... Steve Bosshard (NU5D)
- Re: [Repeater-Bu... no6b
- Re: [Repeater-Builde... no6b
- Re: [Repeater-Bu... Jim B.
- Re: [Repeater-Builde... n . mckie
- Re: [Repeater-Bu... Joe Montierth
- Re: [Repeate... Teton Amateur Radio Repeater Association (TARRA)
- Re: [Repeate... Kevin & Natalia Mitchell
- Re: [Repeater-Builde... JOHN MACKEY