This is exactly the same method I used for my RC-110. I have since upgraded to a RC-210 and have discarded the software or I would pass it along. I guess I could look for it... or you can download the developers package as I did.
73, Mike At 11:35 AM 05/15/2006 -0700, you wrote: >At 5/15/2006 10:26 AM, you wrote: > > > > > > Ken, how does Arcom upload the operating firmware into the RC-110? The > > > checksum error has been present on the file I download from NetMedia for > > > over two years, as I have been trying to get a working copy for that > long. > > > > > > Could I get a copy of the upload program from Arcom that works? > > > > > > 73 - Jim > > > > > > >Jim, > > > >I do not have any of Ken's controllers to play with, but I did try > >downloading the BasicX program only (downloader, compiler, & editor) > >file (bx-setup-210-program.zip 3.992megs) and installed it without a > >problem. I can't say that it works as I do not have a device to load, > >but it does start and appears to be OK. > > > >Ed Yoho > >WA6RQD > >I purchased a complete BX-24 development system a couple of years ago & had >no problem uploading my program into the BX-24. I also just downloaded the >downloader from http://www.basicx.com/downloads/bx-setup-210-program.zip, >installed it & compared the files to the ones I used during development; >they're identical. > >Bob NO6B > > > > > > > >Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
