Mathew, What is the model/combination number of the radios you want to modify? The Mastr Exec II radio service manuals are assembled based upon what combination of components are in the radio. If you can supply what board numbers are in the radio, I can probably tell you which LBIs you need to make up a complete service manual. These numbers usually begin with 19C or 19D, and might look like (for example) 19D417075G9. A good source of GE info is here: http://www.repeater-builder.com/rbtip/geindex.html BTW, are you interested in selling any of these radios?
73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of n9lv Sent: Wednesday, May 24, 2006 3:51 PM To: [email protected] Subject: [Repeater-Builder] Mastr Executive II Help on changing 440 Xcvr to 2 Xcvr for Crossband Operation I have a slew of GE Mastr Executive II radios that I want to take the 2 meter receiver and place into the 440 MHz transmitter to make them crossband for link radios for remote receive sites. These are the Canadian versions so no mods are needed for the units to work in the ham band. Also, if someone has a link or possibly a location to be able to identify which radio is what by the COMB number this would be helpful as well. Also if anyone has a service manual they would be willing to let go of, I could use one of them as well. Thanks for the assistance. Mathew Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
