Miguel,
I think the previous reference to Pins 3 & 5 are in error. Pins 3 & 5
are OK if you reference the 19-pin R/T Unit (the radio) connector, but
it is Pins 31 & 32 on the HEAD.
73's - John, K3KR
N9WYS wrote:
Miguel,
If you are talking about the green and orange wires coming from the
control
head, these are power wires and not speaker wires... The radio needs these
to see +12V (the orange being ignition sense, IIRC) on these before it can
power up. Speaker needs to connect to Pins 3 and 5 on the 32-pin connector
of the control head...
I have a manual for that radio - if you need a schematic, I can scan in a
page and let you know.
73 de Mark - N9WYS
-----Original Message-----
From: [email protected]
<mailto:Repeater-Builder%40yahoogroups.com> On Behalf Of ai4sb
Hello and thanks for reading!!
ok, I have a motorola mitrek UHF converted to the ham band. I have the
control cable attach and I attach a local speaker to the green and
orange wires then I apply power...
I should be able to hear the squelch/noise and hear myself in the
speaker, but that is my problem, I do not hear anything nothing is
comming out,, my question is how do I start troubleshooting this to
find out what is wrong and how to fix this???
Any help is appreciated
Happy New Year
Miguel, ai4sb
