Thanks Chuck, found them in the list that was referenced. So these are
correct, why do they not work? Anyone with any good ideas?
Mathew
Chuck Kelsey <[EMAIL PROTECTED]> wrote:
For high side, high band -- F+11.2/9
For high side, UHF -- F+11.2/27
Chuck
WB2EDV
----- Original Message -----
From: Mathew Quaife
To: [email protected]
Sent: Monday, January 01, 2007 11:44 AM
Subject: Re: [Repeater-Builder] Bowmar Crystals Ordered, all the RX not
working for GE EXEC II mobiles
Thanks Chuck, that is what they sent me, so your math is just fine. Then
there must be something I am missing. I can take one of the old xtals and they
work out just fine, so I know the receivers are working. Might I ask what the
formula you used was? It's been a long time since I have calculated a crystal
freq. so just need the formula configuration.
Mathew
Chuck Kelsey <[EMAIL PROTECTED]> wrote:
If my hasty math is correct:
144.81 low side = 14.845555
144.81 high side = 17.334444
434.875 low side = 16.39537
434.875 high side = 16.521296
Chuck
WB2EDV
----- Original Message -----
From: "n9lv" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, January 01, 2007 10:40 AM
Subject: [Repeater-Builder] Bowmar Crystals Ordered, all the RX not working
for GE EXEC II mobiles
> Hope someone can help shed some light here. I ordered xtals from
> Bomar (3 week wait) for the GE EXEC II mobile radios, 6 for RX for
> 144.810 and one RX of 434.875, all high side injection. None of them
> are working at all. At the same time I ordered tx xtals for the same
> radio, they all work just fine. What might I be missing here, or did
> they just cut them all wrong.
>
> Mathew
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
