Tim,
The AT&T spec for line loss from the sending end to the central office is 9
+- 1 dB and from the central office to the receiving end is 9 +- 1 dB. So your
total loss will be 18 +- 2 dB.
I need to find my tone remote manual to get the answers to your other
questions.
WA9ZZU
"Steve Bosshard (NU5D)" <[EMAIL PROTECTED]> wrote:
I believe 16 db would be terribly excessive loss for a line - maybe 6
db tops. I usually set -10 dbm @ 1000 hz for +/- 3 khz deviation. ). 0 dBm
for max deviation. and let the tone levels fall into place as you have
indicated. If the line measures 6 db of loss @ 1000 hz, you may want to move
the hold tone from -20 dBm to -17 or -14 dBm and the remainder accordingly.
Also loss may vary with tone frequency, so loss at 1000 hz may be far different
from loss at 2175 hz. Best luck, Steve NU5D
On 4/26/07, tim_shephard <[EMAIL PROTECTED]> wrote: I'm working with a GE
repeater, Master II. Its tone remoted. It is
setup and working, but I'd like to know how to set the tone remote
--
Ham Radio Spoken Here.....NU5D
Nickel Under Five Dollars
