Why is everyone so crazy to clean the inside of Motorola T-1500 duplexer bottle body with cleaners?
Unless there is some pitting on the plunger body... you need only blow out the dust, put a little tiny bit of lube (I use dry silicon, teflon, or Amsoil MP) on the threaded shaft and slowly spin the plunger up and down through its range a few times. The finger stock is set up by design to polish the plunger body as it goes up and down. Silly people use the wrong type of wire wheel to scratch and embed metal into the plunger body. I've never found a need to use sand paper... s. > "georgiaskywarn" <[EMAIL PROTECTED]> wrote: > Had an experience with using "TarnX" in cleaning some Moto cans. Had a > friend of mine that used this with great success. I used it...had > issues. The difference is he used "running water" when I used a "pan > of water". Didn't clean off very well...so corrosion came on even > faster because the "Murratic Acid" (sp?) didn't clean off very well. > > Got to thinking (because I have to do this again), why not just > use "Murratic Acid" which is used in pool cleaning products. A gallon > of this...deluted...is MUCH cheaper than the "smallish" bottles > of "TarnX". > > Anybody use this before??? > 73 > Robert >
