I DESPISE the proliferation of all these unlicensed wireless devices cropping up these days (I saw the downward spiral in wireless "professionalism" starting when the FCC started eliminating 1st, 2nd and 3rd Class RadioTelephone licenses and replacing them with the - IMHO - useless General RadioTelephone ticket). But I digress...
After many years of operation with no problems, about 2 weeks ago we started experiencing an intermittent "hash" type interference on my 434.xxx link receiver at one of my sites. It didn't appear on any other receiver up there - not the 146.320 nor the 446.900 one. When it occurs, it sounds a lot like horizontal sync buzz and usually lasts a few hours or so. Of course the link is toned so the buzz is a problem only as it relates to "capturing" a valid link signal being received. I went up to the site and luckily it was happening while I was there. According to my handheld, it was fairly weak and was wide - from about 200 kHz below my receive link channel to above it by almost 500 kHz. This seems a bit narrow to be a video signal but I noticed towards the high end of the range, the buzz fades only to be replaced by a "quiet" carrier. Strange.... I plan on taking my SA up there next week to see if I can better identify the offending signal but I suspect it's one of those low power, Part 15 434 mHz POS.... Ken ------------------------------------------------------------------------------ President and CTO - Arcom Communications Makers of repeater controllers and accessories. http://www.arcomcontrollers.com/ Authorized Dealers for Kenwood and Telewave and we offer complete repeater packages! AH6LE/R - IRLP Node 3000 http://www.irlp.net "We don't just make 'em. We use 'em!"
