I also had intermittent interference coming from two amateur repeaters. I maintain an ARMY MARS repeater and when repeater a and repeater B were on it produced a signal within 5 khz of the input to the ARMY MARS repeater. Both amateur repeaters were located on top of the same building. The MARS repeater was located some miles away.
It took a little looking at a spectrum analyzer to find the two. Repeater A minus repeater B plus repeater A = interference to MARS repeater. David ----- Original Message ----- From: Nate Duehr To: [email protected] Sent: Saturday, November 10, 2007 9:34 PM Subject: Re: [Repeater-Builder] Possible interference on 146.160 On Nov 10, 2007, at 4:52 AM, Ron Wright wrote: > Bruce, > > I have a 146.04/64 repeater and for years have noticed weak signals > roaming in the bottom part of 146. I had thought it was from cable, > but have not been able to verify or locate. > > A local 146.67 repeater has the most server problem with a weak > signal opening its receiver often (it is not toned). > > 73, ron, n9ee/r Noise is noise, I don't think there's any particular relationship between the part of the band being hit and the noise sources that are typical. I've been struggling to find a weak carrier on the input of our 147.225 (147.825 input) repeater for years... -- Nate Duehr, WY0X [EMAIL PROTECTED]
