The R-100 has two fixed outputs available. De-emphasized audio is available on terminal E1, but I would not recommend using it. The audio level is only about 100mv p-p at this connection. A better choice would be the Discriminator Audio output on terminal E5. This is capable of 2 volts p-p and I believe the RLC controller would like to have 1 volt p-p at it's input. If you use the discriminator output of the R-100 you will have to look into the RLC manual and find the jumper option to add the de-emphasis filter to the circuit. It's in the manual for the RLC under "Connecting the Receiver Audio".
73, Joe, K1ike mickupi wrote: > > - > ---------------------------------- > I am using the R-100 Hamtronics receiver. > Mick > >
