One comment on using the Alinco radios. A buddy ran one on EchoLink and had some cooling issues. He wound up putting a muffin fan near the radio, and then had a hum issue due to coupling to the fan motor. So plan your install carefully with respect to cooling, and take care not to get into the hum issue with whatever fan you use.
73 - Jim W5ZIT --- w7vtm <[EMAIL PROTECTED]> wrote: > Thanks for the responses. The Alinco looks to be the > fastest way to > get this up and running. I like the idea of that > DB-9 connector on > the rear of the radio. > > 73's > > Rick - W7VTM > > > > --- In [email protected], "George > Henry" <[EMAIL PROTECTED]> > wrote: > > > > The radios recommended on the IRLP site are Moto > GM300, Maxtrac, or > M120 > > with the 16-pin options connector, GE Phoenix S or > SX, or Alinco > DR435T > > (135T for 2-meters). > > > > > > George, KA3HSW / WQGJ413 > > > > > > ----- Original Message ----- > > From: "w7vtm" <[EMAIL PROTECTED]> > > To: <[email protected]> > > Sent: Friday, December 14, 2007 8:34 PM > > Subject: [Repeater-Builder] Which 440 Synthesized > radio to use with > IRLP? > > > > > > > Building a quick IRLP simplex interface and what > are the current > > > synthesized 440 radios you guys are using? > > > > > > Thanks, > > > > > > Rick > > > > > ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
