I found this in one of the PDF files on 3M's site:
= = = = =
Removal of Cured Coating:
It is extremely difficult to remove cured fusion
bonded
epoxy coating by sandblasting alone. To make removal
easier:
Bake above 600°F/316°C for several hours or above
800°F/427°C for one hour prior to sandblasting.
OR
Heat coated part to 250°F/121°C or above and scrape
coating off.
Other removal methods include the use of epoxy
strippers and hot sand baths.
= = = = =
Neither method would work to get it off your hand. In
the meantime, don't get any in places you don't want
it!
Bob M.
======
--- skipp025 <[EMAIL PROTECTED]> wrote:
>
> You guys ever figure out and actually test a solvent
> that works
> on Scotchkoat? I've never found a solvent that did
> a good job...
> especially after it (the Scotchkoat aka scotchcoat)
> had a chance
> to dry.
>
> curious minds want to know...
>
> cheers,
> s.
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
