A 100% confirmed in-stone station control module swap? s.
> Cort Buffington <[EMAIL PROTECTED]> wrote: > > I've also done station control cards. > > On Feb 6, 2008, at 4:34 PM, skipp025 wrote: > > > > > The only Micor & MSR-2000 Module I know to be an equivalent > > (less the edge connector) is the Squelch Gate Module. I would > > not ever plug in any other Module without doing all the proper > > homework (checking). > > > > cheers, > > skipp > > > > > "Tom Manning" <AF4UG@> wrote: > > > > > > Hello Kris > > > Micor station modules can be used in MSR2000 units with this > > stipulation. You must use msr 2000 connectors on the Micor modules. > > I use the connectors from MSR 2000 modules that I would not be using > > to go on the Micor modules. This is very helpful to save several > > dollars. 73 de Tom MAnning, AF4UG > > > ----- Original Message ----- > > > From: Kris Kirby > > > To: [email protected] > > > Sent: Wednesday, February 06, 2008 12:25 AM > > > Subject: [Repeater-Builder] Micor station modules? > > > > > > > > > > > > Can Micor station modules be used in an MSR2000 station? > > > > > > -- > > > Kris Kirby, KE4AHR <kris@> > > > But remember, with no superpowers comes no responsibility. > > > --rly > > > > > > > > > >
