It's in the Service menu. You need the radio attached
to the RIB and computer. Run RSS, press F2, then F2
again for Alignment menu. Then choose Transmit Output
Power.
With a wattmeter and dummy load attached, press F6 to
cause the radio to transmit. Use the UP/DN arrow keys
to fine-tune the power level. If you want to make a
large change, press F6, see what the power is, press
F6 to stop transmitting, use the UP/DN arrow keys to
change the setting by 10-20, press F6 again to check
the power.
There may be several subsequent things RSS will ask
you to adjust; press F8 to save the new power, then
press F10 to exit.
The radio should be stable down to about 50 watts.
Bob M.
======
--- dy3mnk <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I have 2 VHF motorola maratrac units and wants
> to put them as a
> repeater. I manage to program the unit to HAM Bands.
> but I can't turn
> down the power output. Its a 100w output on both
> unit, Iwant tpo turn
> them down up to 30w. How can I trim down the power?
> Is It done in
> programming? How is it done? Any one out there who
> can teach me how to
> do it and help will be appreciated very
> much....Thanks
>
> Lowell
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.
http://tools.search.yahoo.com/newsearch/category.php?category=shopping
