Thanks Skipp, It is designed for low input power (400-500MW). The component layout is not similar to the ones in the UHF or VHF-HI Manuals. I hope to use it in place of a TLD2601A Continuous Duty AMP in an MSR2000 and I want to get it dialed in just right.
I've been talking to a guy at TPL but his initial search for a manual didn't turn up the exact one. I'm hoping that he is still looking. I'll call him again Monday or Tuesday. The other thing I need to figure out is how to satisfy the "Control Voltage" back to the Exciter (with the TLD2601A removed) so I can get some power out of it. If I do get an actual manual from TPL I'll scan it for the group. Bill Westphal - WB6YPF [EMAIL PROTECTED] http://www.westphalfamily.com/ --- In [email protected], "skipp025" <[EMAIL PROTECTED]> wrote: > > You should be able to work with a combination of the two manuals > found on the sonic web page... http://www.radiowrench.com > > The UHF Repeater Manual has a lot of the RXR Information and the > vhf mobile manual has a lot of the proper rf for your unit. There > are variants such as your "SP" (special production) label says > your amplifier is one of... but they all follow a theme. > > Some of the details for special version amplifier might be a > hybrid amplifier input for low drive, but I wouldn't expect anything > rocket science new to be installed. > > I'd probably get on the the horn (telephone) to TPL and ask if > they can supply one. Otherwise you're doing right to ask around. > > cheers, > skipp >
