Wow. Guess that power company will be brought up on charger for manslaughter. ;->
Joe M. Paul Finch wrote: > Guess you guys did not see the email floating around about the thief > that was stealing wire from a power substation and grabbed the wrong > wire with his insulated side cutters. Short non-graphic story he was in > three pieces and there was zero blood. > > Paul > > > ------------------------------------------------------------------------ > *From:* [email protected] > [mailto:[EMAIL PROTECTED] *On Behalf Of *Barry C' > *Sent:* Wednesday, April 23, 2008 12:28 AM > *To:* [email protected] > *Subject:* RE: [Repeater-Builder] More on Copper theft > > > Premeditated manslaugther .. MM nah thank but no thanks > > ------------------------------------------------------------------------ > To: [email protected] > From: [EMAIL PROTECTED] > Date: Wed, 23 Apr 2008 00:05:19 -0400 > Subject: Re: [Repeater-Builder] More on Copper theft > > My way is prevention. Once they hit that Heliax, they don't be hitting > any more tower sites - preventing the next guy and likely saving > some of > your lines. > > Your way is just "passing the problem on" to the next site. (not meant > as criticism per se) > > By weeding out all the scum, the problem is prevented. > > Joe M. > > Barry C' wrote: > > Prevention is better than a cure ( which you keep secrete) > > Geovision siftware and some old cctv cams is cheap connected to some > > sort of high intensity light source tends to slow them down ... > > > > ---------------------------------------------------------- > > To: [email protected] > <mailto:[email protected]> > > From: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > Date: Tue, 22 Apr 2008 23:23:51 -0400 > > Subject: Re: [Repeater-Builder] More on Copper theft > > > > Well, how about feeding 220 (and I'm not talking the MHz variety) > > through a piece of Heliax to feed something on the tower like a > light? > > (or even as an unterminated open circuit) > > > > That way, when the cut through it with the rest, SURPRISE! The > guy who > > was stealing the cable will be the body attached to the cut pieces. > > > > I know.... excessive force. > > But, if it's feeding the light, is it excessive? > > Wrap it with tape that says "warning - dangerous voltage". > > > > Joe M. > > > > Jim Miller WB5OXQ in Waco wrote: > > > There has got to be a way to catch and make an example of these > > > thieves. The buyers of copper must be trained to be selective > > about who > > > they buy this stuff from and require good ID and keep records > of who > > > they buy from and be aware that the stuff might be stolen. > > Regulations > > > as stiff as buying or selling a handgun might help. Something has > > GOT > > > to be done. > > > WB5OXQ > > > > > > > > > > > > ---------------------------------------------------------- > > > > > > No virus found in this incoming message. > > > Checked by AVG. > > > Version: 7.5.524 / Virus Database: 269.23.3/1392 - Release Date: > > 4/22/2008 3:51 PM > > > > > > ---------------------------------------------------------- > > before someone else does Find the job of your dreams > > <http://mycareer.com.au/?s_cid=596064 > <http://mycareer.com.au/?s_cid=596064> > > > > > > > ---------------------------------------------------------- > > > > No virus found in this incoming message. > > Checked by AVG. > > Version: 7.5.524 / Virus Database: 269.23.3/1392 - Release Date: > 4/22/2008 3:51 PM > > > ------------------------------------------------------------------------ > Grab it. You dream job is up for grabs. > <http://mycareer.com.au/?s_cid=596065 > > > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 269.23.3/1392 - Release Date: > 4/22/2008 3:51 PM > > > > No virus found in this outgoing message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 269.23.3/1392 - Release Date: > 4/22/2008 3:51 PM > > > ------------------------------------------------------------------------ > > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 269.23.3/1392 - Release Date: 4/22/2008 > 3:51 PM ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater-Builder/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
