Hi Gareth, Thanks for that, I was hoping to fit it into a T300 RX, we are getting some interferance on one of link freq, from what we think is a in-home TV Transmitter. Going CTCSS would be an easy fix.
Thanks Kevin. Get Skype and call me for free. ----- Original Message ----- From: Gareth Bennett To: [email protected] Sent: Saturday, May 10, 2008 9:20 PM Subject: Re: [Repeater-Builder] CTCSS Information Required. Hi Kevin, Sounds like you have a CTCSS board from a Tait T500. These are a specialty item and are probably more hassle to interface to a third party device. Regards _________________________________________________________________ Gareth Bennett This email is confidential, if you received this message in error, or you are not the intended recipient, please return it to the sender and destroy any copies. Thank you. ----- Original Message ----- From: Gmail - Home To: [email protected] Sent: Saturday, May 10, 2008 7:00 PM Subject: [Repeater-Builder] CTCSS Information Required. Hi All, I have what I believe to be a Tait CTCSS unit. The numbers on the baord are 225-00011-41B. I know it is a 2 channel CTCSS unit, as it has two pots on it. I can work out which wires are the +12v and ground, but I do nmot have any information on what the other 10 connections points are. What I would like to do is find the audio input and then the tigger line/s for each of the 2 tones. I do not want to pass the audio through the CTCSS, but have it for indicating when there is the correct CTCSS tone. Can anyone help? Thanks in advance Kevin, ZL1KFM. Get Skype and call me for free.
sparc_nz
Description: Binary data
