I believe the Motorola "standard" is 750 Hz for deviation on PL for MICORS. That's what I use on my system, and it hasn't failed me yet. YMMV.
Don, KD9PT ----- Original Message ----- From: David Murman To: [email protected] Sent: Friday, July 18, 2008 6:49 PM Subject: RE: [Repeater-Builder] PL Problem Isn't 1K a little hot for PL tone? David -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of tgundo2003 Sent: Friday, July 18, 2008 7:56 AM To: [email protected] Subject: [Repeater-Builder] PL Problem I need some suggestions. It seems that my users that have newer Motorola "Astro" series radios have a problem on my Micor UHF repeater where the PL does not always open up their radios. It seems that it's only Astro type radios that have the problem. I have the PL Deveation set at 1K. It's generated internally on the uni-chassis TX PL board. I have 2 GP-300's, 1 MAxtrac, 1GM300, a Yeasu dual band Mobile and a Radio Shack HTX-404 (With an MDC board installed it in! I actually love that little radio) and None of them have any problems decoding the PL. So what's up with the new stuff? It it really picky? what else should I check? Thanks!! Tom W9SRV P.S.- I told them all to buy old radios and be done with it. Besides the TX audio out of the new stuff sucks anyways, IMHO, unless you like listening to over-processed crap ;) !DSPAM:1016,48812b3f932333712038390!
