Check the repeater-builder site for a mod to the station control module to make it DISABLE the transmitter and add a status LED as well. Bill - WA0CBW In a message dated 8/5/2008 10:23:34 A.M. Central Daylight Time, [EMAIL PROTECTED] writes:
n9wys wrote: > Well, Joe - I got it to work! > > What I ended up doing was chasing the audio path from the "goes-inna" > through the backplane. I found that on the Squelch Gate card, it was not > being passed, even though the jumper was in place. I added a hard-wire > jumper to the backplane between Pins 11 and 24, and "VOILA!" > > The next thing I need to do is figure out why I cannot defeat PL > operation... when I switch the Station Control to PL DISABLE, the station > still transmits. In fact, it transmits even when the LINE DISABLE is > switched on, too. More jumpers, I fear. It's not supposed to. It doesn't say 'Transmit Disable'. Line Disable will disable any DC or Tone remote. PL just opens the local speaker to carrier squelch. ------------------------------------ Yahoo! Groups Links **************Looking for a car that's sporty, fun and fits in your budget? Read reviews on AOL Autos. (http://autos.aol.com/cars-BMW-128-2008/expert-review?ncid=aolaut00050000000017 )
