Not in those words ("PL encoder") no... and I understand that.
I am keying the repeater with an external source (AKA: HT) that is encoding
PL.
The Master Control module is NOT passing PL to the modulator on Pin 2. THIS
is my problem. I need a schematic for the Master Control module that I have
in my possession so I can troubleshoot further.
Mark - N9WYS
-----Original Message-----
From: [email protected] On Behalf Of sgreact47
A community repeater has NO PL Encoder..
The PL from the receiver is decoded and the PL tone is low pass
filtered and passed to the transmitter PL Encode input by the Master
Decoder card in the station.
So, if you key the station locally there is NO PL Encode.
Also, there is NO PL tone on the tail either.
"n9wys" wrote:
>
> Yes...
>
> The station is a Community Repeater - not the "conventional" MICOR
> repeater that most are familiar with. In other words, it uses
> a different backplane
