Eric and the group, I had a similar comment offered to me per your comments below. This reduced DRAMATICALLY the desense in my machine / rack. If it were me I would certainly start there. My cables were made at the RF Connection in MD to the lengths and gender that I requested. The cost was well worth it. -Mike,K4CVL
******************************************************** I suggest you go back to your original plan of replacing the single-braid coaxial cable jumpers that exist inside the repeater cabinet, before getting sidetracked into other potential cures. In any case, as I noted in a previous posting, replacing the gray single-braid jumper cables with RG-400/U cable completely cured my own desense problem.
