If you find out how to do that, let me know!!!!! I gave up and switched to Tait TM8110 it allows ctcss injection.
> We are using a pair of Motorola CDM-1250 UHF mobiles, 403-470 split, for our > UHF repeater along with an Arcom RC-210 controller. > > We want to strip the PL tone when CW and / or Voice ID's are sent. The > arcom controller has the capability of sending logic out to the radio or an > external tone board to turn the encode on or off. > > Does anyone have any knowledge of how one might be able to inject the CTCSS > logic into the 16-pin accessory port, or otherwise connect to the CDM radio > and control whether the CDM will encode our PL tone or not? > > Another option is the CommSpec SS-64, which I have on hand. However, we > cannot simply parallel the tone output into the pre-emphasized audio input > of the radio. I know that the radio could probably be programmed for no > pre-emphasis, but I don't want to bypass limiting. > > Ideas or suggestions? Maybe someone knows a good location to inject the > tone directly into the radio's modulator? > > Thank you, > > James Adkins, KB0NHX > [EMAIL PROTECTED] > > > > > > -- > James Adkins, KB0NHX > > District 1 Technical Field Engineer > Troop A--Lee's Summit; Troop H--St. Joseph > Missouri State Highway Patrol > 504 SE Blue Parkway Lee's Summit, MO 64063 > 816-622-0707 ext. 235 > 417-840-5261 (Cell) > > "I'm James Adkins and I approve this message" > ------------------------------------------- Ken
