I can't see ruining the bottom half of a good harness when I have top top half from another antenna that is been damaged that I can use. Last time I had to replace one of the connectors on a DB antenna the VB material in the cable either was still sticky or got that way from trying to solder the new connector on it and it was a real pain. Is there a trick to it that I don't know ?? -- Doug N3DAB/WPRX486/WPJL709
---- Chuck Kelsey <[EMAIL PROTECTED]> wrote: ============= It gets cut off along with the "Y", the short section of VB83 and the balance of the pigtail. You should end up with a section of VB8 that you can add a new connector to. Chuck WB2EDV ----- Original Message ----- From: "Laryn Lohman" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, October 23, 2008 9:02 PM Subject: [Repeater-Builder] Re: DB antenna question > Chuck, what do you do with the unconnected N connector at the top end > of the bottom harness? > > Laryn K8TVZ > >
