Tom Manning wrote:
GOOD AFTERNOON kEVIN
This last response is my thinking about the Mitrek and is why I
asked the question earlier. If the Mitrek coils are the same as the
Micor coils what factor would prohibit this being done.
The coils are not the same, but I believe there is no reason I wouldn't
be able to reproduce coils that would replicate the factory low split
ones for the Mitrek.
There is considerable work to change the coils but if the Micor
coils are the same nothing would prohit a person from doing this. As
I said earlier I know for a fact that the mid band receivers will not
tune lower than 146 Mhz. Perhaps an occasional one would be found
that would tune to 144.0 Mhz but not all. Thanks. 73 de Tom Manning,
AF4UG
I need to look at a VHF Mitrek and see if I can build replacements and
at what cost.
I did not see where you gave a price of a set of Micor receiver
coils. Where might I find this info? Thanks. 73 de Tom Manning, AF4UG
The Holiday Special price of the VHF MICOR redo is laid out in the link
below:
http://www.repeater-builder.com/rbtip/hs-coilinstructions.html
Kevin
