Ken, That won't work either.
I can't gate the receive audio since discriminator audio is fed to the panel to determine valid PL tone. I simply need to find a location inside the panel to break transmitted audio ahead of the CWID and status tone generation section. Randy WB0VHB >The RAD should be in the receiver audio path not the transmitter path > >Ken > >At 07:16 PM 2/5/2009, [email protected] wrote: > >I am using a Zetron Model 48B as a repeater controller. Everything is >going fine except my addition of a Arcom RAD audio delay board. The >board is working great except now the CWID and status tones are not >transmitted.
