Try here. Looks like you can download info for all their connectors.
http://awapps.commscope.com/catalog/andrew/product.aspx?id=46
Chuck
WB2EDV
----- Original Message -----
From: Rick Szajkowski
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 16, 2009 3:24 PM
Subject: Re: [Repeater-Builder] Andrews hard line help
no new ends :( all NOS) but no distructions ... so any and all help .
I will go look at the ends and see if I can read part #'s
On Mon, Mar 16, 2009 at 3:14 PM, Chuck Kelsey <wb2...@roadrunner.com> wrote:
There is an instruction sheet that comes with the new connectors, so you
should be all set when you get them. No special tools required.
Chuck
WB2EDV
----- Original Message -----
From: Rick Szajkowski
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 16, 2009 3:11 PM
Subject: [Repeater-Builder] Andrews hard line help
Hello to the group ... I need to run some new 7/8 hard line and some 1/2
inch
Question is there any info on installing the ends on both I did a google
search and not luck
any help would be great and also any special tools ?
Thanks in advance ..
Rick
