Thanks Nate .. :P yes I looked inside .. there was water damage to the box's when I got the ends with the coax ..
I will double check to see if I have any luck On Mon, Mar 16, 2009 at 3:37 PM, Nate Duehr <[email protected]> wrote: > Just checking here… they’re usually INSIDE the little red & white boxes > that the connectors come in. Did you get those and/or have you looked > inside real carefully? > > > > If they’re really NOS, I’d think they’d still be in their boxes. > > > > Nate WY0X > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rick Szajkowski > *Sent:* Monday, March 16, 2009 1:25 PM > *To:* [email protected] > *Subject:* Re: [Repeater-Builder] Andrews hard line help > > > > no new ends :( all NOS) but no distructions ... so any and all help . > > I will go look at the ends and see if I can read part #'s > > > On Mon, Mar 16, 2009 at 3:14 PM, Chuck Kelsey <[email protected]> > wrote: > > There is an instruction sheet that comes with the new connectors, so you > should be all set when you get them. No special tools required. > > > > Chuck > > WB2EDV > > > > > > > > ----- Original Message ----- > > *From:* Rick Szajkowski <[email protected]> > > *To:* [email protected] > > *Sent:* Monday, March 16, 2009 3:11 PM > > *Subject:* [Repeater-Builder] Andrews hard line help > > > > Hello to the group ... I need to run some new 7/8 hard line and some 1/2 > inch > > Question is there any info on installing the ends on both I did a google > search and not luck > > any help would be great and also any special tools ? > > Thanks in advance .. > > Rick > > > > > > >
