Not sure who is looking for the yagi antenna but I have three NOS Sinclair SRL307 antennas still in the box. All elements are welded.
73 Gary K4FMX _____ From: [email protected] [mailto:[email protected]] On Behalf Of Chuck Kelsey Sent: Monday, March 30, 2009 7:59 AM To: [email protected] Subject: Re: [Repeater-Builder] Need supplier for UHF welded yagi Look here: http://www.sinclairtechnologies.com/catalog/product.aspx?id=89 Chuck WB2EDV ----- Original Message ----- From: Gran Clark <mailto:[email protected]> To: [email protected] Sent: Sunday, March 29, 2009 11:50 PM Subject: Re: [Repeater-Builder] Need supplier for UHF welded yagi Chuck I will call Sinclair. They don't list a welded antenna. On the beam I have the elements are mounted on the outside of the boom which I would think would be hard to make a good weld if I went that way. Gran At 07:34 PM 3/29/2009, you wrote: Forgot to add that Sinclair makes one for the amateur portion of the band. You can order direct - they have a ham discount. Chuck WB2EDV ----- Original Message ----- From: Chuck <mailto:[email protected]> Kelsey To: [email protected] Sent: Sunday, March 29, 2009 9:24 PM Subject: Re: [Repeater-Builder] Need supplier for UHF welded yagi I'll second that. Chuck WB2EDV ----- Original Message ----- From: John J. <mailto:[email protected]> Riddell To: [email protected] Sent: Sunday, March 29, 2009 9:12 PM Subject: Re: [Repeater-Builder] Need supplier for UHF welded yagi Gran, you might want to consider a Sinclair yagi...they are built like a battleship ! ...not cheap...but they work well. 73 John VE3AMZ
